The 30A DC2 rectifier/regulator is for use with 3 phase permanent magnet alternators. It uses “Buck”
circuitry which stores and regenerates some of the energy which would otherwise be lost during
switching. The output may be set, at the factory, to any voltage between 13 and 14V DC. A signal line is
provided to switch off the regulator, for example, to reduce load on the engine. An internal sensor is
provided to monitor temperature. The DC2 has a single integral, military standard connector.
Peugeot/AsiaTech F1 circa 2001
Prost AP01/AP02
